Online Store
English

Asia Pacific

America

Europe

Middle East

N5 Dual

User Guide

1. Product Introduction 2. Activating Your N5 Dual 3. Installation Instructions 4. Interface Introduction 5. Function Introduction 6. Maintenance 7. FAQ
Appearance Indicator Guide Specifications
Downloading DDPAI App Connecting N5 Dual with Smart Phone
Memory Card Installation Dash Cam Installation Rear Camera Installation Radar Module Installation (Optional Accessory)
"Device" Interface "Local Album" Interface Preview Interface Device Album "Me" Interface System Settings
Video Function Photographing Function Parking Monitoring Collision Detection & Locked Videos Data Transmission SR Function GPS Function Advanced Driver Assistance System (ADAS) Radar Function (Optional)
Firmware Upgrade Safety Precautions
FAQ

Rear Camera Installation

1. Clean the rear windshield (the approximate installation position of the rear camera Is shown in the figure below).

 

2. Connect the rear camera to the power cable (rear).

 

3. Insert the rear power cable fully into the N5 Dual headphone jack.

Please make sure that the power cable is fully plugged into the jack, if not, the rear camera indicator will not on, and the rear camera will not work.

 

4. Route the rear power cable from the Dash Cam to the rear camera, cable routing is shown in the figure above.

 

5. Remove the red backing film of the adhesive sticker, and adjust the field of view of the rear camera, then fix the rear camera to the inner wall of the rear windshield.

 

 

 

 

Is helpful?