If you have installed the optional hardwire kit and radar module successfully, you can use the radar detection function in the parking monitoring mode.

After the device enters the parking monitoring mode (sleep mode), the radar starts working. Within the detection range of the radar, when the radar detects a moving object, it will wake up the Dash Cam to record a 10-second video. If the radar still detects moving objects within 20 seconds during this period, it will perform time-lapse recording (up to 30 minutes). If not, it will enter sleep mode. If the radar/AI recognition does not detect any target objects (people/motor vehicles/non-motor vehicles/animals) for 2 minutes, it will also enter sleep mode again.

● The radar function needs to be realized by the optional hardwire kit & radar module.

● After the car is turned off, the radar starts to detect. If it continues to detect a driver/passenger in the car, it will not enter the parking monitoring mode. The Dash Cam will not enter the parking monitoring mode until the radar detects no target in the front or rear within 5 seconds.

① Install the hardwire kit & radar module. For details, please refer to Chapter 3 Radar Module Installation (Optional).

② When the system detects radar module (optional), the parking monitoring mode automatically switches to sleep mode.

▶ Setting Radar Sensitivity

The radar sensitivity includes high, medium-high, medium (default), medium-low, and low. The higher the sensitivity of the Dash Cam, the easier it is to identify the target and trigger the shooting of video; The lower the sensitivity of the Dash Cam, the less likely it is to identify the target and trigger the shooting of video.

After the mobile phone is connected to the Dash Cam, open the app, and tap “Device Settings” > “AI-radar recognition”.

.