● For the first time use, ONLY after successfully connecting to the App for activation can the Dash Cam start recording.
● As the app is constantly upgraded, the actual operation may be slightly different from the following description. Please connect your device to a phone according to the prompts in the DDPAI App.
● Bluetooth Connection
For the first time of use, please connect the N5 Dual to your mobile phone through the Bluetooth.
Step 1: Power on the Dash Cam. Turn on the Bluetooth of your mobile phone.
Step 2: Launch the DDPAI App, tap “Device”> “+ Add a device”.
Step 3: Select the current device name (DDP0FXXXX) in the detected Bluetooth device list.
Step 4: Press the function button on the Dash Cam to authorize.
Step 5: When the Dash Cam is successfully connected to your mobile phone, it starts recording and the indicator stays green (Please check the indicator of your Dash Cam).
● When connecting for the first time, please follow the on-screen instructions and press the function button on the device to confirm authorization to connect. When you are prompted to upgrade the app, please tap “Upgrade” to confirm.
● The Dash Cam can only be connected to one mobile phone via Bluetooth at a time.
● When it is not the first time to connect, there is no need to confirm authorization through the function button on the device, and automatic connection can be achieved. But when the Dash Cam has been connected to other mobile phones or restored to factory settings, you need to follow the steps for first connection to reconnect the Dash Cam.
● When other mobile phones want to connect to the Dash Cam, please turn off the Bluetooth of the original mobile phone, delete the device on the app, or reset the device to allow another mobile phone to connect the Dash Cam via Bluetooth.
● Wi-Fi Connection
If you want to view the device album, device settings, or enter the preview interface, you need to connect to the camera via Wi-Fi first. For Android phones, there is no need to connect manually, the system will connect automatically. For iPhone, please refer to the instructions below to perform the Wi-Fi connection.
Step 1: Tap “Go to connection” > “WLAN”
Step 2: Select the current device “DDPAI_N5Dual_XXXX”. Paste the password directly into the edit box and tap “Join”.
If the Bluetooth connection fails, you can also select to connect the Dash Cam by using built-in Wi-Fi feature.
① Open the DDPAI App, enter the "Device" page, tap "+ Add a device", enter the "Choose your device" interface, and then tap "Device without Screen".
② Tap "Next" > "Connect to Wi-Fi" in turn, and the detected Wi-Fi of the Dash Cam (such as DDPAI N5Dual_XXXX) will be displayed.
③ Connect your phone to the built-in Wi-Fi "DDPAI N5Dual_XXXX" of the Dash Cam, and the default password is 1234567890.
● For iPhone: When you enter the“Settings”interface, select "WLAN" > "DDPAI N5Dual_XXXX", enter the initial password (1234567890), and tap Join.
You can also paste the password directly into the edit box.
● For Android phones: In the Wi-Fi list, select "DDPAI N5Dual_XXXX", enter the initial password(1234567890), and tap Connect.
④ After successful connection, you can directly enter the "Device" interface of DDPAI App.
