When you select the step-down line to take power, the parking monitoring function can be realized. After the vehicle is turned off, the dash cam will automatically enter the parking monitoring mode, and will automatically record if there is an abnormal collision. You can set the parking mode, parking monitoring time and vehicle battery protection voltage value.
① After the mobile phone is connected to the dash cam, open the app, enter the "Device" interface, tap "Enter the device", and you will enter the "Now&back" interface;
② Tap 
(Camera Settings) on the upper right corner of the interface and enter "Camera Settings" interface > "Parking mode" / "Parking Monitoring Duration" / "Vehicle Battery Protection".
|
Settings
|
Details
|
|
Parking mode
|
After the vehicle is turned off, you can choose to enter time-lapse video recording/normal video recording/sleep
|
|
Video duration selection
|
Set the duration: 12 hours, 24 hours (default), 48 hours
|
|
Vehicle battery protection
|
Set the battery protection voltage: High (12.4 V), middle (12V)(default), low (11.8 V).
When the charge of the vehicle battery is lower than the selected voltage, the dash cam will be turned off automatically to prevent the battery from losing power.
|
Parking Mode: Time-lapse video recording
After the car is turned off, it will enter time-lapse recording. It will shut down after reaching the set time or detecting low voltage. After shutting down, it can only be awakened by the ignition.
Parking Mode: Normal video recording
Normal recording will be maintained after the car is turned off. It will shut down after reaching the set time or detecting low voltage. After shutting down, it can only be woken up by the ignition.
Parking Mode: Sleep
After the car is turned off, it enters the sleep mode. After a collision, it will wake up and work for 2 minutes. It will delay taking the photo for 5 seconds and generate a 10-second video (photo file name starts with "G" and ends with "L"). In addition, it will remind you the collision event when waking up next time.
This function needs to be realized by optional step-down line.
