Method 1:
Gently remove the SD card from the card slot of the Dash Cam, insert it into the card reader, then plug it in the computer, open the DCIM folder, and browse or edit the photos or video files saved in the SD card.
See the following table for details of each folder in the memory card:
Folder Name |
File Name |
Source |
Details |
200 video |
For example: “20190719161640_0060.mp4” |
Front Camera |
Normal video files generated by front camera), "60" indicates the duration of the video in seconds |
For example: 20190719161640_0060_A.mp4 |
Rear Camera |
Normal video files generated by rear camera, "A" indicates the file is generated by the rear camera |
|
For example: S_20190719154514_0364_0030.mp4 |
Front Camera |
Time-lapse video files generated by front camera start with "S" |
|
For example: Q_20190719154514_0364_0030.mp4 |
Rear Camera |
Time-lapse video files generated by rear camera start with "Q" |
|
201 photo |
For example: |
Front Camera |
The photo file (front) triggered by voice control or capture function begins with "N", for example, and "L" indicates that there is associated video, which will not be covered by loop |
For example: R_20200524113544_035_0005_L.jpg |
Rear Camera |
The photo file (rear) triggered by voice control or capture function begins with "R", and "L" indicates that there is associated video, which will not be covered by loop |
|
For example: G_20190524113544_035_0005_L.jpg |
Front Camera |
The photo file triggered by the collision begins with "G", and "L" indicates that there is associated video, which will not be covered by loop |
|
For example: U_20190524113544_035_0005_L.jpg |
Rear Camera |
The photo file (rear camera) triggered by the collision begins with "U", and "L" indicates that there is associated video, which will not be covered by loop |
|
202 thumb |
/ |
/ |
Used to store thumbnails |
203 gps |
/ |
/ |
Used to store G-sensor data |
Method 2:
If the memory card is not inserted into the Dash Cam, you can browse emergency video files and radar trigger video files (radar module is required) in the built-in storage of the Dash Cam.
Folder Name |
File Name |
Source |
Details |
200 video |
For example: H_20161223091810_0010.mp4 |
Front Camera |
Front camera file generated by radar trigger, "H" indicates the file is generated by the radar trigger |
For example: H_20161223091810_0010_A.mp4 |
Rear Camera |
Rear camera file generated by radar trigger, "A" indicates the file is generated by the rear camera |
|
For example: W_20161223091810_0010.mp4 |
Front Camera |
Front camera file triggered by the collision begins with "W" |
|
For example: W_20161223091810_0010_A.mp4 |
Rear Camera |
Rear camera file triggered by the collision begins with "W", “A”indicates the file is generated by the rear camera. |
●If the camera sensitivity is turned off in the camera settings, emergency photo and video files will not be generated in the event of a collision.
●The radar trigger file can only be found after the radar module (optional accessory) is successfully installed.