You can tap ”Device Settings” on the "Device" interface or tap 
on the preview interface to enter the settings interface, where you can check the various parameters of the Dash Cam.
▶ Sound Control
You can set the speaker volume, power-on tone, local voice control and the ADAS function.
|
Settings
|
Details
|
|
Speaker Volume
|
Adjust the speaker volume
|
|
Power-on Tone
|
You can select to turn on/off the power-on tone (default: on)
|
|
Local Voice Control
|
You can select to enable/disable local-voice control function (default: enable)
|
|
ADAS Intelligent Assistant Reminder
|
You can select to enable/disable the function. If you enable this function, you can set the ADAS sensitivity, enable/ disable the voice reminder for the vehicle in front starting and the fatigue driving
(Note: If there are changed in installation position or lens angle, you need to re-calibrate the ADAS)
|
▶ Preview Display
|
Settings
|
Details
|
|
Rear lens screen flip left/right
|
You can select to enable the function, and the rear camera view will be flipped left/right
|
▶ Device Recording
You can set video encoding, recording resolution, video duration associated with photographing, photographing sensitivity, etc.
|
Settings
|
Details
|
|
AI.265 video encoding
|
The video is recorded with H.264 encoding by default. You can set AI.265 encoding through the app, which will improve the picture quality by 50% and requires higher mobile phone performance. If the video freezes during playback, you can disable this function or preview the video on the computer.
|
|
Recording resolution
|
You can select 4K (2160P) / Full HD (1080P)
|
|
Microphone recording
|
You can select to enable/disable the function (default: off)
|
|
Timestamp
|
You can select to enable/disable the function
|
|
Display Speed
|
You can select to enable/disable the function
|
|
Duration of related videos during shooting
|
When the device is in working condition, an emergency photo and an emergency related video will be automatically generated when a collision is detected. You can set the duration of the emergency related video. For details, see Chapter 5 Collision Detection & Locked Videos > "Set the duration of emergency related video"
|
|
Adjust collision sensitivity
|
When the device is in driving state, it will automatically take a photo when it detects collision. When the device is in parking mode, it will automatically take a photo and video when it detects collision. You can set the sensitivity of taking pictures. The higher the sensitivity is set, the easier it is to trigger taking pictures. If this function is turned off, the collision detection & locked video function will not be available. For details, see Chapter 5 Collision Detection & Locked Videos
|
▶ Shutdown Settings
For vehicles where the cigarette lighter is not powered off after the car is turned off, the Dash Cam will shut down after 15 mins of parking.
|
Settings
|
Details
|
|
Automatically shutdown after 15 mins of parking
|
You can select to turn on/off this function (default: off). If this function is enabled, the Dash Cam will automatically shut down after 15 mins of parking.
|
▶ Parking Monitoring
When you select the intelligent step-down line, you can set the parking mode, and vehicle battery protection voltage. See Chapter 5 Parking Monitoring for details.
|
Settings
|
Details
|
|
Parking mode
|
After the vehicle is turned off, you can choose to enter time-lapse video recording/normal video recording/sleep
|
|
Parking monitoring duration
|
Set the parking mode duration: 12 hours, 24 hours (default), 48 hours. When the car is turned off and reaches the set time, the Dash Cam will enter sleep mode to protect the battery
|
|
AI-radar recognition
|
When the radar detects abnormal movement of people or objects around it, it will wake up and record the video. You can set the sensitivity of the radar: High, medium-high, medium, medium-low, and low
|
|
Vehicle battery protection
|
Set the battery protection voltage: High (12.4 V), middle (12V)(default), low (11.8 V)
When the vehicle battery's power falls below the selected voltage, the Dash Cam will automatically shut down to prevent battery power outage
|
● The parking mode needs to be realized by optional step-down line.
● The radar function needs to be realized by the optional hardwire kit & radar module.
▶ Management
You can set the Wi-Fi password or name, format your memory card, or view information such as device model No., firmware version, etc.
|
Settings
|
Details
|
|
Dash Cam Wi-Fi Name
|
You can set the Wi-Fi name
|
|
Dash Cam Wi-Fi Password
|
You can set Wi-Fi password
|
|
Manage device storage
|
You can check the storage capacity, and choose to format the memory card/built-in storage (Note: formatting will cause the device data to be cleared, please operate with caution)
|
|
About device
|
You can view information such as device model No., firmware version, etc.
|
