Online Store
English

Asia Pacific

America

Europe

Middle East

mini

User Guide

PACKAGE CONTENTS PRODUCT OVERVIEW Installation LED Indicator INSTALL DDPAI APP APP INSTRUCTION UPGRADE APP AND FIRMWARE SPECIFICATIONS FCC STATEMENT CAUTION CUSTOMER SUPPORT Other
PACKAGE CONTENTS
PRODUCT OVERVIEW
Installation
LED Indicator
INSTALL DDPAI APP
On the Road Me Device Pair Smart Phone to Dash Cam Pair Smart Phone to Dash Cam Preview Playback Download VideoFiles
UPGRADE APP AND FIRMWARE
SPECIFICATIONS
FCC STATEMENT
CAUTION
CUSTOMER SUPPORT
Other

Installation

1.Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
2.Remove the protective film from the back of the bracket, attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.

 

 

3.Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.

 

 

EN EN
Ideal mount area Ideal mount area
Tuck in cable Tuck in cable

 

4.Turn on the engine after installation, you will hear a boot tone, the Dash Cam powers up and starts recording, meanwhile, an LED indicator will blink slowly in normal mode.
5.Adjust the angle of the lens by rotating the Dash Cam. We recommend pointing the lens slightly downwards (≈10° below horizontal), so as to record video with a 6:4 road to background ratio. It is recommended to adjust the Dash Cam position while looking at the screen to select the best viewing angle.

Is helpful?