Asia Pacific

America

Europe

Middle East

INSTALLATION

1.Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
2.Take out the Dash Cam and bracket from the box, push the lock button on the bracket, and insert the USB Type-C port of the bracket into the USB Type-C port of the Dash Cam to ensure that the bracket fits firmly.

 

 

3.Remove the protective film from the back of the bracket, attach the adhesive side of the bracket on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.

 

 

4.Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.

 

 

EN EN
Power traces Power traces
Ideal mount area Ideal mount area

 

5.Turn on the Dash Cam after installation, you will hear a boot tone, and a blue light flashes slowly.
6.Connect the DDPAI App, refer to the reference line on the preview interface, and rotate the bracket to adjust the camera angle.

 

 

Is helpful?