DDPAI X5 Pro
User Manual

Product Overview

X5-PRO-Product-Overview
  1. Front recorder camera
  2. Holder for the main device
  3. Parking monitoring indicator light
  4. Function button
  5. Reset button
  6. Micro SD Card slot
  7. Type-C port
  8. Speaker
  9. Operating light
  10. Microphone
  11. Lens angle adjustment handle

Pacakage Contents

Indicator

Installation

1. Disconnect the power supply of the vehicle.

2. Take out all wires inside the packing box and locate the power cable and the terminals include:

1) Red ACC wiring terminal

2) Yellow VCC wiring terminal

3) Black GND wiring terminal

3. Arrange the power cable to the fuse box along the front windshield, A-pillar, compartment in the driving room.The wiring layout is shown as below figure. The front camera should be mounted and fixed on the front windshield, somewhere around the rear view mirror.The optimal mounting area is shown below.

4.Connect black line (GND) to the ground wire inside the fuse box of vehicle.

5. Connect red line (ACC) to the +12VDC power supply for ignition control in the fuse box.

6. Connect yellow line (VCC) to the 12VDC power supply inside the fuse box. The power supply is always on and will not be controlled by the ignition.

7. Connect the black rear signal line to the rear camera, and then arrange the wires to the rear lens position of the vehicle as shown in figure. The installation position and wiring layout of the rear camera is shown in below figure.

Install DDPAI APP

For Android/iOS phones, search for “DDPAI” in the Google Play Store or Apple App Store. Download the App and install it on your phone.

App Instruction

DDPAI has built-in Wi-Fi module that the mobile phone can be directly connected to it to set up a wireless LAN. Through the wireless data transmission, you can preview the video in real time, playback the driving video, download and share the driving video and photos from the “DDPAI” App in your mobile phone. These operations will not consume your mobile phone traffic.

Description: The built-in Wi-Fi of recorder cannot be used as mobile data for surfing the internet or functioned as mobile hotspot.

Download DDPAI App

Scan the above QR code or search “DDPAl” from iPhone/ Android App store and download it.

Connect to recorder via mobile phone Wi-Fi

After the power of dash cam is on, you will hear a voice of “Hello, DDPAl”, indicating that it has been successfully electrified.

1. Make sure that the dash cam and mobile phone are within 2.5m.

2. Enter the DDPAI App of mobile terminal and select “device>+ connect to new device” from the homepage to select the corresponding device.

3. Select the dash cam Wi-Fi from the list to connect

(1) Android phone : Select “DDPAI_X5 Pro_XXXX” from the Wi-Fi list and input password 1234567890 to connect to recorder Wi-Fi.

(2) iOS phone: Select and enter “WLAN” interface from the setting and select “DDPAI_X5 Pro_XXXX” from the scanned Wi-Fi list and input password 1234567890 to connect to recorder Wi-Fi.

Video preview and playback

Video preview: After the mobile phone successfully connect the dash cam, select “device >enter dash cam” from the homepage to enter “real-time/playback” interface to preview and current recording image.

Video playback: Enter the preview interface and there is a progress bar under the preview interface, the video can playback by dragging the progress bar.

Dash cam setting

Enter the preview interface and there is a setting icon at the right top corner of the preview interface, click to enter and set according to your preference.

Upgrade App And Firmware

Update via App: If a new version of the firmware is released, opening the App will prompt you to download it. You can also open the staring App, enter “Me-> About”, click to detect the new version, the App will automatically download and upgrade.

Upgrade via PC: Access your Dash Cam via PC with USB data cable. Download the latest firmware for your camera, unzip and copy the content you have unzipped onto the built-in memory. Power on the camera and it will apply the firmware automatically.

Specifications

  • Product name: Dash cam

  • Product model: X5 Pro

  • Product size: 102.8*64.6*33.3mm

  • Product specification: 12V/1A

  • RAM: 4Gb

  • GPS: Built-in high-precision sub-meter GPS module

  • G-Sensor: Built-in 6-axis Motion Tracking device. Variable sensitivity G-sensor auto detects sudden shake/collision and emergency locks the footage to “Event File” to prevent that video from an overwrite.

  • Storage: Built-in eMMC with a storage capacity of 32G, external Micro SD Card can support 128G at the maximum (adaptive to Class 10 above)

  • Wireless module: Built-in 5GHz Wi-Fi Wireless module

  • Picture pixel: front 3840*2160, rear 1920*1080.

  • Video: the front can support 2160P@30fps or 1080P @90fps, the rear can support 1080P@25fps IFront lens: 7 optical lens, FOV 140°, F1.8 aperture

  • IRear lens: optical lens,FOV 125°, F2.0 aperture

Fcc Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference
(2)This device must accept any interference received, including interference that may cause undesired operation.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Caution

The product’s optimal temperature range is -20°C — 70°C.
Install the device near the rear-view mirror to obtain the best open-field view. Do NOT install the Dash Cam in a location that will obstruct your required driving view.
This device adopts build-in eMMC card, featuring high efficiency, stability, long use life. The eMMC card should be formatted via App or PC regularly to maximize the lifetime of the memory card.
Do not use any cardboard, paper towel, or napkins to clean the lens.
Do not attempt to repair, dismantle, or modify the Dash Camera hardware by yourself.
Do not install the product in an environment with high humidity, or combustible gases or liquids.
Drawings for illustration purpose only. Actual product may vary due to product enhancement.